The CLUM series ultra-fine vertical mill production line is a new type of ultra-fine grinding equipment that integrates grinding, grading, transportation, secondary powder selection, and finished product packaging. The product fineness can reach 400-3000 mesh.
CLUM series ultra-fine vertical mill is widely used in mining, chemical industry, building materials, medicine, food and other industries. It can be used for limestone, barite, calcium carbonate, kaolin, alumina, titanium dioxide, graphite, fluorite, ceramics, Ultra-fine grinding of fertilizers, feed, food and other materials.
- Preparation work
Check whether all parts of the equipment are intact, whether the fasteners are firm, and whether the electrical circuits are connected correctly.
Clean the remaining materials in the machine cavity and check the wear of the grinding roller and grinding ring.
Prepare the materials to be ground and adjust the parameters of the grinder according to the characteristics of the materials. - Power-on operation
Connect the power supply and start the main motor.
Slowly adjust the feeding amount until the appropriate state is reached.
Observe the operation of the grinder and make adjustments as necessary. - Operation monitoring
Regularly check the operation of the grinding mill, including current, voltage, temperature, vibration and other parameters.
Observe the fineness and yield of the material and make adjustments as needed.
Clean the accumulated powder in the machine cavity promptly to prevent clogging. - Shutdown operation
Stop feeding, and after all materials in the waiting chamber are discharged, turn off the main motor.
Cut off the power supply and perform necessary maintenance. - Precautions
Operators must be trained and familiar with the equipment’s operating procedures.
During operation, necessary safety protective equipment should be worn.
Perform regular maintenance on equipment to ensure safe operation of the equipment.
The following are common faults and troubleshooting methods of the CLUM series ultra-fine vertical mill production line:
| Fault phenomenon | Reason | Method of exclusion |
| Motor overheated | Motor overload, cooling system failure | Reduce feed volume and check cooling system |
| The grinding roller is seriously worn | The material has high hardness and the grinding roller material is inappropriate | Replace the grinding roller and adjust the parameters of the grinding mill |
| Finished product fineness is not up to standard | The feeding amount is too large and the parameter settings of the grinding mill are unreasonable | Reduce the feeding amount and adjust the mill parameters |
| The vibration of the mill is too large | The equipment foundation is not firm and the grinding roller and ring are unbalanced | Reinforce equipment foundation and adjust grinding roller and ring |
Precautions
Before operating the grinder, you should read the instructions carefully and become familiar with the operating procedures.
Operators should wear protective equipment to prevent accidents.
Regularly check the wear of the grinder and replace worn parts in time.
Keep the grinder clean to prevent material accumulation.
Advantages of CLUM series ultra-fine vertical mill production line
This production line adopts advanced technology and has high production efficiency and finished product quality.
The production line has a high degree of automation, simple operation and easy maintenance.
The production line can be customized according to user needs to meet the production needs of different users.